Showing posts with label HSPA. Show all posts
Showing posts with label HSPA. Show all posts

Sunday, 15 November 2009

HSPA Evolution

HSPA Evolution (HSPA+) is the latest enhancement of the existing WCDMA/HSPA technologies as defined by 3GPP standards Releases 7&8. HSPA+ is aimed at improving the performance of current 3G networks while making another step closer to LTE/EPS implementations. It is an easy and cost effective solution as it can be realised by simply upgrading the software of RAN equipment.

In summary the main drivers of HSPA+ are:
  • Higher data rates (up to 42Mbps DL and 11Mbps UL) and lower latencies for the support of new data services (e.g. VoIP, PTT, interactive gaming)
  • Better spectrum utilisation will provide higher throughput and also lower cost for the operators
  • Allow a packet-only operation for both voice and data (better support for VoIP)
  • Strengthen the role of mobile technologies to the competition with fixed broadband networks and keep up with WiMAX technologies
  • Exploit the full CDMA capabilities and provide a smooth migration towards LTE/EPS

The major technical characteristics introduced by HSPA+ are:

Higher Order Modulation Schemes
=> higher data rates
  • 64QAM is the highest allowed modulation scheme for HSPDA (from 16QAM in Release 6)
  • 16QAM is the highest allowed modulation scheme for HSUPA (from QPSK in Release 6)
MIMO for DL
=> higher data rates
  • 2 Tx antennas at NodeB transmitting different streams with up to 64QAM modulation scheme and at least 2 Rx antennas at UE
L2 enhancements in both UL and DL
=> higher data rates, higher throughput
  • Larger RLC PDU sizes can be used to support the higher rates achieved
  • Flexible RLC size selection
  • RLC PDU segmentation
  • RLC PDU's of different RAB's can be multiplexed in one MAC PDU to reduce overheads
Continuous connectivity of data users (CPC)
=> lower latencies, improved battery life, lower interference, increased capacity
  • Remain in the CELL_DCH even when inactive to reduce latencies
  • UE DTX/DRX of the Dedicated Physical Control CHannel (DPCCH) when there is no data to send and receive
  • No transmission of the High Speed - Shared Control CHannel (HS-SCCH) to reduce signaling and improve capacity; the decoding of the HS-DSCH is achieved blindly
Enhanced CELL_FACH
=> higher data rates, lower latencies
  • HSDPA traffic can be carried on FACH
  • HSUPA traffic can be carried on FACH
Improved Receivers
=> higher data rates, better efficiency
  • Interference cancellation of ‘other cell’ power for HSDPA terminals
  • Better equalisers

Email the author

Friday, 13 November 2009

How Does HSUPA Work?

HSUPA is an improved UL for HSDPA in order to support higher data rates than the ones achieved by R’99 whilst introducing reduced UL latency as well. It uses most of the R’99 features, while employing some new methods of delivering user data from the terminal to Node B. HSUPA is standardised in 3GPP Release 6 and its main characteristics are summarised below:

  • Multi-code transmission
  • Node B scheduling
  • Option for shorter TTI (TTI = 2ms or TTI = 10ms)
  • Node B retransmissions (H-ARQ)
  • Variable spreading factor of minimum SF = 2
  • Power control
  • Soft handover

Channel Structure
A new transport channel dedicated to each HSUPA user carrying the user data with HSUPA operation is introduced and denoted as Enhanced Dedicated Channel (E-DCH). Only one E-DCH is dedicated to one HSUPA user and it is mapped onto a pool of newly introduced physical channels (i.e. 1, 2 or 4 E-DCH Dedicated Physical Data Channels - E-DPDCH's and 1 E-DCH Dedicated Physical Control Channel - E-DPCCH). The channel slot structure is shown below:


E-DPDCH carries the HSUPA data and has a variable spreading factor of minimum SF2. E-DPCCH is used for the transmission of the essential information for decoding E-DPDCH and has a fixed SF = 256. It also carries information about retransmissions and power allocation.

E-DPDCH transmission requires simultaneous transmission of the R’99 DPCCH and the E-DPCCH. The first one contains important information about channel estimation and power control, while the other one about decoding.

Three DL physical control channels without carrying any higher layer information are also introduced. These are the E-DCH HARQ Acknowledgement Indicator Channel (E-HICH), the E-DCH Relative Grant Channel (E-RGCH) and the E-DCH Absolute Grant Channel (E-AGCH).

The E-HICH is a dedicated channel with a fixed SF = 128 carrying DL information about retransmissions (i.e. ACK/NACK from the Node B). E-RGCH is also dedicated with SF = 128 carrying the power step up/down scheduling commands from the Node B. Both E-HICH and E-RGCH are transmitted in a single code channel using different signatures. Finally E-AGCH is a common channel with SF = 256 carrying information about the exact amount of power each terminal can use for the E-DPDCH transmission. Each terminal checks whether an E-AGCH is meant for it by recognizing its ID contained in the frame.

Multi-Code Transmission
Adaptive modulation and coding (AMC) is not used in HSUPA, as higher modulation schemes require more energy per bit and the terminals have limited power transmission capability. The solution for achieving higher data rates is found in the use of multi-code transmission, which is more efficient in the UL than AMC.

Multiple (i.e. up to 4) E-DPDCH's can be transmitted for one E-DCH (i.e. one HSUPA user) during one TTI, using code multiplexing. The multiplexed E-DPDCH's can use the same or even different SF's with the allowed combinations being described explicitly in the standards. In order of descending data rates, the allowed combinations for multi-code transmission are 2xSF2 + 2xSF4, 2xSF2, 2xSF4.

For each E-DCH transmission exactly 1 E-DPCCH has to be sent in the same TTI. E-DPCCH and the E-DPDCH'(s) carrying data of the same E-DCH are transmitted using different codes in different branches of QPSK modulation (I-Q multiplexing) leading to transmission of BPSK symbols. The E-DPCCH is always transmitted using I branch.

Node B Based Scheduling
HSUPA scheduling is also shifted to Node B as in HSDPA. However, the scheduling procedure is very similar to the R’99 rather than the HSDPA one. The scheduling algorithm simply tries to keep the cell throughput high by adjusting the E-DPDCH transmit powers and thus the TFC selections. The terminal provides information about its capability of emptying its buffers and the Node B decides whether it can transmit more power or not according to the noise rise limit.

Node B Based Re-Transmissions (H-ARQ)
H-ARQ functionality in HSUPA is very similar to the HSDPA one. The terminal keeps in memory unacknowledged packets and retransmissions take place in case of NACK reception from the Node B. Both IR and CC strategies are supported in HSUPA and the only main difference is that HSUPA HARQ procedure is synchronous. This means that the system knows which HARQ process is used without need for including such information in the data stream.

Option for Shorter TTI
HSUPA allows for the support of two TTI lengths to be chosen; TTI = 2ms and TTI = 10ms. Same as in HSDPA, shorter TTI length (i.e. 2ms) can provide for reduced delays between retransmissions and better utilisation of the resources by reacting faster to the channel conditions. When the channel conditions for a user are changed, the TFC used by the user can be easily changed as well in order to adapt to the new conditions. Furthermore TTI = 2ms supports higher data rates, as above 2Mbps the block size for TTI = 10ms becomes too large and is limited.

However for great number of users, short TTI length requires the transmission of very high number of DL control signals and thus can lead to very high consumption of the Node B power especially, for areas at the cell edge. In HSDPA, the users are time-multiplexed and such problem does not exist. Therefore, the shorter TTI is expected to be used for distances closer to the Node B and as the distance grows, TTI = 10ms will be used.

Email the author

How Does HSDPA Work?

HSDPA represents an evolution of the WCDMA radio interface, which uses very similar methods to those employed by EDGE (Enhanced Data Rates for GSM Evolution) technology for the GSM radio interface. The fundamental characteristics which enable the increase in the data throughput and capacity with reduced latency are summarised below:

  • Time and code multiplexing of the users
  • Multi-Code transmission
  • Fixed Spreading Factor (SF = 16)
  • Shorter TTI = 2ms
  • No DTX (Discontinuous transmission)for the data channel
  • Adaptive modulation and coding (AMC) supporting higher order modulation
  • Node B scheduling and link adaptation
  • Node B retransmissions (H-ARQ - Hybrid Auotmatic Repeat-Request)
  • No power control
  • No soft handover

Channel Structure
A new transport channel carrying the user data with HSDPA operation is introduced and denoted as High Speed Downlink Shared Channel (HS-DSCH). This is mapped onto a pool of newly introduced physical channels (i.e. High Speed Physical Downlink Shared channel - HS-PDSCH) to be shared among HSDPA users in a time multiplexed manner. One user only transmits during a single TTI, which has a fixed shorter duration of 3 slots (i.e. 2ms). If code multiplexing is used as well, then multiple users can transmit during the same TTI, using different codes. The HS-PDSCH slot structure is shown below.


Two new physical control channels are also introduced for the handling of associated signalling without carrying information from higher layers. Namely, they are the High Speed Shared Control Channel (HS-SCCH) for the DL and the High Speed Dedicated Physical Control Channel (HS-DPCCH) for the UL.

HS-SCCH has a fixed spreading factor (SF = 128) and carries mainly information essential for demodulation and retransmissions. One HS-SCCH per TTI is required for each active HSDPA user. HS-DPCCH has a fixed spreading factor (SF = 256) and carries mainly channel quality information and ACK/NACK for retransmissions.

An HS-PDSCH corresponds to one channelling code of fixed spreading factor SF=16, and thus there are maximum 15 such codes available for HS-DSCH transmission under one code tree, as at least 1 such code is needed for UMTS and HSDPA control channels. It is noted here that the same code tree is used for both UMTS and HSDPA traffic when a single carrier deployment is used, to do otherwise the use of multiple scrambling codes per cell would be required. The use of a separate carrier for HSDPA would add another code tree and thus increase the capacity of the system.

Multi-code transmissions are also supported in HSDPA, which means that the user equipment can be assigned multiple codes during one TTI, depending on its capability. This allows users to transmit large amounts of data in one TTI leading to a better resource utilisation which increases system throughput. Throughput is also increased by not supporting DTX for HS-PDSCH and users are scheduled only if they have data to transmit.

AMC (Adaptive Modulation and Coding)
An HS-PDSCH may use QPSK or 16-QAM modulation symbols, and several channel coding rates depending on the channel conditions, as reported by the terminal in the HS-DPCCH frames. Thus the system adapts to the channel conditions and can achieve higher data rates when the conditions are favourable. This procedure is denoted as link adaptation and has similar effects as power control without need for power control overhead. Each modulation scheme and coding rate combination is denoted as Transport Format Combination (TFC) or Modulation and Coding Scheme (MCS).

Node B Based Fast Scheduling and Link Adaptation
The scheduling and link adaptation in HSPDA are performed in the Node B unlike R’99, where scheduling is done in the RNC. Node B estimates the channel quality for each active user based on the feedback provided by them in the HS-DPCCH frame. Afterwards the user to be served first depends on the scheduling algorithm and the user prioritisation.

In general, there are three principal scheduling algorithms depending on the equipment (the algorithms used to implement these can take many different forms) and these are:

  • C/I based (Max C/I) – serves in every TTI the user with the largest C/I
  • Round Robin (RR) – users are served in a cyclic order ignoring the channel quality conditions
  • Proportional Fair (PF) – serves users with the largest relative channel quality (i.e. the channel quality conditions are weighted by the user throughput)

Node B scheduling in combination with the shorter TTI provides with faster scheduling and better resource utilisation, as the network reacts faster to the channel conditions and higher rates can be achieved for users with good channel conditions.

Node B Based Retransmissions (H-ARQ)
Apart from scheduling, retransmission handling is also shifted from the RNC to Node B in HSDPA and thus from RLC to the physical layer. The packets sent to a user are kept in the Node B buffer until an ACK is received from the terminal carried in the HS-DPCCH frame. The RNC will retransmit only in case that the physical operation fails. This makes retransmissions faster, reducing the latency but also provides with combining gain, as the terminal keeps the energy of both transmissions.

The retransmission protocol selected in HSDPA is the Stop and Wait (SAW) due to the simplicity of this form of ARQ. The Hybrid ARQ (H-ARQ) technique is fundamentally different from WCDMA retransmissions because the UE decoder combines the soft information of multiple transmissions of transport blocks at bit level imposing significant memory requirements on the UE. Two different Hybrid ARQ strategies are generally used:

  • Chase Combining (CC) – the basic idea of the CC strategy is to transmit identical versions of the erroneously detected data packet and then use maximal ratio combining effectively providing with time diversity and soft combining gain.
  • Incremental Redundancy (IR) – additional redundant information is incrementally transmitted if the decoding fails on the first attempt.

Email the author

Quick HSPA Overview

WCDMA Release '99 enables peak rates of 384kbps with latency of 100-200ms and can adequately support various voice and data services. However new services such as mobile video-streaming, voice-over-IP, real time gaming, etc. require even higher data rates and especially reduced latency making the need for a new radio interface essential.

A straightforward and cost effective upgrade of the existing UMTS networks was made possible with the 3GPP Releases 5 (High Speed DL Packet Access – HSDPA) and 6 (High Speed UL Packet Access – HSUPA), together known as High Speed Packet Access (HSPA). The two technologies aim at increasing the achieved peak data rates beyond 10Mbps in the DL and up to 3-4 Mbps in the UL whilst providing reduced latency. Apart from the performance improvement, HSPA provides an increase in the capacity and spectral efficiency allowing support of both high rate symmetric and asymmetric services.

The HSPA deployment is performed on top of the WCDMA network through the introduction of additional software and hardware to the existing network elements (i.e. Node B’s), potentially keeping the required cost relatively low. The same carrier for both WCDMA and HSPA can be used, although a separate carrier provides a greater increase in capacity. HSPA support has already been introduced for laptop computers in the form of data cards and there are also several HSDPA enabled 3G mobile phones in the market place.

Technical details about HSDPA and HSUPA can be found in How Does HSDPA Work? and How Does HSUPA Work?.

Email the author